1.We are specialize in high voltage electrified dispaly device indicator
2.HV Indicator lamp
3.High voltage Indicator
LB-I display device
-
Technical Features:
Capacitive transducer:18pF/12KV or 18pF/24KV; Frequency:50Hz; Phase:3; Least input current:5uA.
control-indicator,sensor-indicator,high-voltage-indicator,indicator,high-voltage-live-display-device,
high-voltage-display,led-display,voltage-indicator,device-indicator,transducer-indicator.
-
-
Model:LB-1 Type Display Device Indicator
Operating humidity:Daily average 95%,mo. average 90%
Operating temperature+40oC~ - 30oC
Application:
LB-series-high-voltage-indicator-is-adapted-for-indoor,-rated-voltage-3~40.5kV,-operation-
frequency 50Hz-network-to-display-the-electrifying-situation-of-the-high-voltage-loop-where-the-
HVLDD-is-mounted,-combine-a-high-voltage-equipment-with-live-display-device.-
This-voltage-indicator-type-LB-1-is-a-combination-unit-for-indicating-the-voltage-presence-
on-M.V.-cubicles-by-being-installed-on-the-capacitive-dividers,-and-conform-to-the-IEC61958-2000-Standard-and-National-Standard.
-
--- 1.application range and characteristic
----- The indoor high volt charged display device is composed of three sensors and display(through lead connection),it is applied to certain indoor high volt electric equipment of rated frequency 50Hz and rated volt below 40.5KV,by this device,it could indicate charged condition in circuit,besides,it can be coordinate-operated with electromagnetic lock,which realizes forced lockout of switch handle and controlled by one high volt signal,while,its circuit system is stand-alone and not interfered one another.Just needing the high volt circuit electrified,even if display circuit and latching circuit arise fault simultaneously,the electromagnetic lock still stay in locking state,which could prevent from mishandle or entering into charged spacing.
-
-
-- -2.execution norm
DL/T538----------(high volt charged display device)-
DL/T593----------(share technical demand of high-volt switching equipment and control equipment)-
JB/T10305---------(3.6KV~40.5KV high volt equipment indoor organic material post insulator’s technical condition)-
GB/T7354---------(partial discharge measuring)
-
